It's finally time to get our transmission installed and finish up this project so we can go out and test it! First we have to prepare the Yaris chassis to accept this C60 hybrid, and that means many rounds of test fitting. I mentioned in Part 3 to use the empty fully assembled C60 case to do all of your testing, this means bolting it to the engine and installing the driver side mount while making the marks where you need more clearance. I tried using a huge hammer and also a pneumatic hammer to no avail, I had to get out the grinder and cut metal away to make enough room for the 6 speed.
0 Comments
|
Connect with meArchives
July 2019
|